SL5000WPH
- Specification
Optical system
Front lens:200mm
Source: 1400W White LED
Fixture CT: 6000K
LED life expectancy:20,000 hours Average Light Source Life*
CRI: Ra: up to 95,R9: up to 95
Pan: 540°/630°optional(16 bit)
Tilt: 270°(16 bit)
CMY+CTO color mixing
Motorized focus
Zoom range: 6.5°-42° (beam angle), 8°-55° (field angle)
Auto focus
Frost
4 individually positionable blades with ±90°rotation of the complete framing system
Iris
Dimming: 0-100% linear dimming
Strobe: electronic, variable from 1-25Hz or pulse
GAMMA: 2.0, 2.2, 2.4, 2.6, 2.8, to fit different camera's linearity
Display
Upgrade with DMX
Remote reset DMX address and fixture by DMX
Run time of fixture and light source
2 Control channel modes: 36/62CH
Input signal isolation
Optional Art-Net control
AC200-240V, 50/60Hz
Product dimension: 467x321x826mm
Net weight: 42 kg
*Testing conditions in the lab may differ based on various factors.
Front lens:200mm
Source: 1400W White LED
Fixture CT: 6000K
LED life expectancy:20,000 hours Average Light Source Life*
CRI: Ra: up to 95,R9: up to 95
Fixture output: 32000lm
Pan: 540°/630°optional(16 bit)
Tilt: 270°(16 bit)
Auto X/Y repositioning
CMY+CTO color mixing
2 Color wheels: each with 6 dichroic filters + open
1 Rotating gobo wheel:6 interchangeable gobos + open. Gobo OD: 34mm
Motorized focus
Zoom range: 6.5°-42° (beam angle), 8°-55° (field angle)
Auto focus
Frost
4 individually positionable blades with ±90°rotation of the complete framing system
Iris
Dimming: 0-100% linear dimming
Strobe: electronic, variable from 1-25Hz or pulse
GAMMA: 2.0, 2.2, 2.4, 2.6, 2.8, to fit different camera's linearity
Refresh rate: 900Hz-25000Hz
IP20
Display
Pan/tilt disengage (hold Left arrow and Right arrow buttons)
Upgrade with DMX
Remote reset DMX address and fixture by DMX
Run time of fixture and light source
2 Control channel modes: 36/62CH
Auto thermal protection circuit
Input signal isolation
Optional Art-Net control
RDM protocol
AC200-240V, 50/60Hz
Power: 1600W
Product dimension: 467x321x826mm
Net weight: 42 kg
*Testing conditions in the lab may differ based on various factors.
Errors and omissions are possible. All specifications are subject for change without prior notice.
































